Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Antenna - Keyless Entry: Service and Repair
Coupe
REMOVAL
NOTE: These vehicles use an alarm and lock system antenna that is part of the body main wiring that runs from the remote keyless entry module to the
heated back window feed wiring. DO NOT REMOVE the damaged alarm and lock system antenna from the wire harness.
1. Disconnect alarm and lock system antenna connector from remote keyless entry module and tape securely out of the way.
2. Connect new alarm and lock system antenna connector to remote keyless entry module.
INSTALLATION
1. Install new alarm and lock system antenna by securing along path followed by unconnected damaged alarm and lock system antenna. Secure using
Ford-approved tie-wrap or tape.
