ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

With Super Sound Audio System|Page 9392 > < Motor and Pump|Page 9387
Page 1
background image

Convertible Top Pump: Service and Repair
With Super Sound Audio System

REMOVAL

1. Disconnect battery ground cable.
2. Remove rear seat cushion pad and frame and rear seat back pad and frame.
3. Remove quarter trim panels.
4. Unsnap the folding top compartment trim from the 19 tackstrip nuts.
5. Unclip the folding top motor upper and lower hose from the retaining clips. Unclip the two amplifier clips.
6. Unclip up and down relays from motor plate.
7. Disconnect the electrical connector from the wiring assembly.
8. Unseat the four folding top hydraulic lift motor and plate grommets from the folding top hydraulic lift motor and plate kit.
9. Remove the two folding top hydraulic cylinder rod shoulder screws.

10. Remove the two folding top hydraulic bracket nuts and remove the two folding top control link brackets.
11. Remove the folding top hydraulic lift motor and plate kit and folding top hydraulic cylinder from the vehicle.

INSTALLATION

1. Follow removal procedure in reverse order.

With Super Sound Audio System|Page 9392 > < Motor and Pump|Page 9387