Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Hood Sensor/Switch (For Alarm): Service and Repair
REMOVAL
1. Open hood and locate anti-theft control bracket and switch attached to LH strut tower.
2. Disconnect harness connector from anti-theft control bracket and switch.
3. Remove two retaining screws and remove anti-theft control bracket and switch from LH strut tower.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten retaining screws to 2-3 N.m (18-26 lb-in).
