Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Hydraulic Control Assembly - Antilock Brakes: Description and Operation
Fig. 1 ABS Hydraulic Control Unit & Anti-Lock Brake Control Module
DESCRIPTION - The ABS hydraulic control unit and anti-lock brake control module are assembled as a single unit. The assembly is located in the RH
lower front corner of the engine compartment, next to the bottom of the radiator coolant recovery reservoir. The unit is mounted inside a bracket, which
is affixed to the RH frame rail.
OPERATION - The hydraulic portion of the hydraulic control unit modulates brake pressure at each wheel through the use of three internal solenoid
valves. A brake fluid pump motor recirculates the brake fluid during ABS cycling.
