Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Brake Caliper: Description and Operation
Front
Disc Brake Caliper-Cobra Internal Components
^
Are pin slider-type disc brake calipers with a sliding bridge type housing.
^
The disc brake caliper has a dual caliper piston with a piston seal and a press-in type dust boot.
^
The disc brake caliper is attached to the front disc brake caliper anchor plate.
^
The front disc brake caliper anchor plate is attached to the front wheel spindle with two 12 mm attaching bolts.
^
The disc brake caliper slides on lubricated disc brake caliper locating pins that are sealed from the elements by rubber boots.
^
The disc brake caliper locating pins are attached to the caliper housing by two pinch bolts.
^
Vehicles are equipped with galvanized steel front disc brake rotor shields that are attached to the front wheel spindle with three pop-rivets per side
and are not interchangeable side-to-side.