Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Brake Pad: Service and Repair
Rear
REMOVAL
1. Raise and support vehicle.
2. Remove wheel and tire assembly.
3. Remove screw retaining brake hose bracket to shock absorber bracket.
NOTE: It is not necessary to disconnect hydraulic components.
4. Remove retaining clip from parking brake rear cable and conduit at rear disc brake caliper.
5. Release tension from parking brake rear cable and conduit and disengage rear parking brake cable end from parking brake lever. Remove parking
brake rear cable and conduit end from rear disc brake caliper.
6. Hold disc brake caliper locating pin hex-heads with open-end wrench. Remove upper rear brake pin retainer.
7. Rotate rear disc brake caliper away from rear disc brake rotor.
