Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
HYDRAULIC CONTROL UNIT REMOVAL
Hydraulic Control Unit Assembly
1. Disconnect battery ground cable.
2. Disconnect two wiring harnesses from the hydraulic control unit.
3. Disconnect five brake tubes.
4. Remove hydraulic control unit ground wire.
5. Remove four bolts.
6. Remove hydraulic control unit from the vehicle.
7. Remove three nuts and mounting bracket from the hydraulic control unit.
DISASSEMBLY
Anti-Lock Brake Control Module/Hydraulic Control Unit