Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Brake Switch (Cruise Control): Service and Repair
Deactivator Switch
REMOVAL
1. Locate and disconnect electrical connector for speed control deactivate switch at pedal support bracket. Slide connector end up off of positioner.
2. Push end of speed control deactivator switch plunger up off plastic stem.
3. Squeeze locking tabs of speed control deactivator switch together and push through mounting hole in pedal support bracket. Remove speed control
deactivator switch.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Depress the plunger and hook fully into the switch body before attaching to the plastic pedal stem.
