Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
38. Install engine front cover.
39. Install six bolts and nine stud bolts. Tighten in sequence to 20-30 Nm (15-22 ft. lbs.). Tighten stud bolts and bolts number 6, 7, 8, 9, 10 and 11 in
no more than four minutes after applying sealant.
40. If removed, install crankshaft position sensor and camshaft position sensor into engine front cover and tighten retaining bolts to 8-12 Nm (71-106
inch lbs.).
