Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
6. Remove two screws retaining bottom of instrument panel finish panel to instrument panel and one screw retaining rear of instrument panel finish
panel to instrument panel.
7. Pull instrument panel finish panel to release two clips left and right of heater control and two clips on top of instrument panel finish panel.
INSTALLATION
1. Engage four clips and install instrument panel finish panel to instrument panel with three retaining screws.
2. Install console finish panel.
3. Connect wiring connectors to radio chassis or digital audio compact disc player.
4. Slide radio chassis or digital audio compact disc player into instrument panel making sure rear bracket is engaged on support rail.
5. Push radio chassis or digital audio compact disc player inward until retaining clips are fully engaged.
6. Connect battery ground cable.
Left
REMOVAL
1. Remove two bolts retaining the bottom of the instrument panel steering column cover to the instrument panel.
2. Pull on instrument panel steering column cover to unsnap the two clips across the top of the instrument panel steering column cover.
3. Remove two bolts retaining instrument panel reinforcement to instrument panel and remove instrument panel reinforcement.
4. Remove two retaining screws from LH A/C register.
5. Pull A/C register out of instrument panel opening.
INSTALLATION
1. Install LH A/C register into instrument panel opening with two retaining screws.
2. Install instrument panel reinforcement to instrument panel and secure with two bolts. Tighten bolts to 7.6-10.4 N-m (68-92 b-In).
3. Snap instrument panel steering column cover into position over instrument panel reinforcement and secure with two bolts. Tighten bolts to
7.6-10.4 N.m (68-92 Lb-In).
Right
REMOVAL
