Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Control Assembly: Service and Repair
Climate Control Assembly Switch
REMOVAL
1. Remove climate control assembly.
2. Remove knob.
3. Disconnect wire connector from heater blower motor switch or wire connector and vacuum bundle from A/C-heater function selector switch.
4. Remove retaining screw and heater blower motor switch or A/C-heater function selector switch.
INSTALLATION
1. Position heater blower motor switch or A/C-heater function selector switch on heater control. Make sure retaining tabs on heater blower motor
switch or A/C-heater function selector switch are engaged in slots. Install retaining screw.
2. Connect wire connector to heater blower motor switch or wire connector and vacuum bundle to A/C-heater function selector switch.
3. Install knob.
4. Install heater control as an assembly in instrument panel.
5. Check system for proper operation.
