ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

J1850 Communications Network|Page 4127 > < J1850 Communications Network|Page 4125
Page 1
background image

Multiplex Communication Network: Description and Operation
ISO 9141 Communication Link

ISO 9141 Communication Link 

The ISO 9141 communication link:
-

consists of a single wire, Circuit 70 (LB/W).

-

provides a common link for communication to an off-board tester through the Data Link Connector (DLC) located under the instrument panel to
the right of the steering column.

-

does not allow module-to-module communications. One micro-processor based subsystem is included on this network:

-

supplemental air bag system

Fault Tolerance

The 1509141 communication link will fail if any of the following occur:
-

Circuit 70 (LB/W) shorted to ground.

-

Circuit 70 (LB/W) shorted to battery positive voltage (B+).

-

the air bag diagnostic monitor loses power or ground supply.

-

a module failure shorts the 1809141 communication link internally.

Purpose

The information within this section is designed to diagnose 1S0 9141 communication link concerns. These concerns may:
-

affect normal functional operations of the vehicle.

-

be directly related to customer concerns.

-

be undetectable except during diagnostics. To properly diagnose a link concern, follow the diagnostic procedure described in this section in the
order presented.

Module Identification 

Modules included on this 1809141 communication link include:

Air bag diagnostic monitor:
-

located behind the instrument panel on the tunnel of the floorpan.

J1850 Communications Network|Page 4127 > < J1850 Communications Network|Page 4125