Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
EGR Electronic Vacuum Regulator Solenoid: Service and Repair
REMOVAL
1. Disconnect fuel charging wiring from EGR electronic vacuum regulator solenoid.
2. Disconnect main emission vacuum control connector from EGR electronic vacuum regulator solenoid.
3. Remove retaining nuts and EGR electronic vacuum regulator solenoid from mounting bracket.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten retaining nuts for EGR electronic vacuum regulator solenoid to 5-7 Nm (45-61 lb in).
