Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Throttle Position Sensor: Service and Repair
Throttle Position Sensor - 4.6L (4V)
REMOVAL
1. Disconnect battery ground cable.
NOTE: When the battery has been disconnected or reconnected, some abnormal drive symptoms may occur while the Powertrain Control Module
(PCM) relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
2. Disconnect fuel charging wiring from throttle position sensor.
3. Remove two throttle position sensor retaining screws.
4. Remove throttle position sensor.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten retaining screws to 2.8-3.8 Nm (25-33 lb in).
