Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
Clutch Switch: Service and Repair
REPLACEMENT
1. Disconnect battery ground cable.
2. Disconnect harness connector from clutch pedal position switch (CPP).
3. Disconnect locating tab lock.
4. Rotate clutch pedal position switch about 90° clockwise and remove switch lock plate. Pry switch off clutch push rod by hand.
NOTE: An audible click will be heard when the clutch pedal position switch is mounted properly onto the clutch push rod.
INSTALLATION
To install, reverse Removal procedure.
