ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Torque Converter Clutch Solenoid, A/T > < Shift Solenoid, A/T|Diagrams|Page 5540
Page 1
background image

Shift Solenoid: Testing and Inspection

Chart #701

DESCRIPTION 

Two ON/OFF shift solenoids are used for electronic shift scheduling. One unit containing the two shift solenoids is located in the main control
valve body. The shift solenoids are two-way, normally closed style. Shift solenoids (SS-1 and SS-2) provide gear selection of first through fourth
gears by controlling the pressure to the three shift valves. 

SS-1

Symptoms: 

Improper gear selection depending on failure mode and manual lever position.
^

Failed ON- first and fourth gear only.

^

Failed OFF- second and third gear only. 

DTCs: 

P0750*, P0751**, P0781**, P0782**, P0783**, P1751, P1714 

SS-2 

Symptoms: 

Improper gear selection depending on failure mode and manual lever position.
^

Failed ON- third and fourth gear only.

^

Failed OFF- first and second gear only. 

DTCs: 

P0755*,P0756**,P0782**,P0783**, P1756,P1715 

SS-1 and SS-2 

Symptoms: 
^

Both failed ON- fourth gear only.

^

Both failed OFF- second gear only. 

DTCs: 

P0750*, P0751, P0755*, P0756

*

Output circuit check, generated only by electrical conditions. 

**

May also be generated by some non-electrical transmission component conditions.

Torque Converter Clutch Solenoid, A/T > < Shift Solenoid, A/T|Diagrams|Page 5540