Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
10. Install main control valve body.
11. Install fluid filter and grommet.
12. Clean, inspect and install pan-to-case gasket and transmission pan. Tighten all bolts to 12-15 Nm (9-11 ft. lbs.).
NOTE: Transmission pan-to-case gasket is reuseable if not damaged.
13. Install transmission shift linkage to manual control lever
14. Pour 4.7 liters (5 quarts) of Motorcraft MERCON Multi-Purpose (ATF) Transmission Fluid XT-2-QDX or equivalent MERCON approved fluid
into fluid filler tube.
15. Reconnect battery ground cable.
16. Start the engine and add specified fluid as required to achieve the proper fluid level.
17. Check the transmission for leaks.
