Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
3. Using Clutch Spring Compressor T65L-77515-A compress the direct clutch support and spring. Remove piston retaining ring using
expanding-type snap-ring pliers.
4. Remove direct clutch support and spring and clutch piston from direct clutch cylinder.
NOTE: Use air pressure if necessary to remove clutch piston.
5. Remove direct clutch inner seal from direct clutch and outer seal from clutch piston. Verify presence of check ball and that it moves freely.
ASSEMBLY
1. Install direct clutch inner seal on direct clutch as follows:
a. Position Direct Clutch Inner Lip Seal Protector T80L-77234-A over direct clutch cylinder.
