Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
3. Install intermediate clutch piston in Intermediate Clutch Piston Seal Protector T95L-77005-A.
NOTE: Coat intermediate clutch piston outer seal and intermediate clutch piston inner seal and pump body sealing area with petroleum jelly.
4. Install intermediate clutch piston in pump body and push intermediate clutch piston to the bottom of the bore by exerting even pressure.
5. Note location of the piston bleed hole.
CAUTION: The piston bleed hole must be located at 12 o'clock position (toward top of transmission). If incorrectly installed, transmission may
not operate properly.
NOTE: Piston bleed hole is the only round hole in the intermediate clutch piston assembly.
