Mustang Cobra V8-281 4.6L DOHC VIN V MFI (1997)
5. Using Gear Rotator T80P-4205-A, rotate the differential pinion gears until the differential pinion gears and differential pinion thrust washers can
be removed.
6. Remove the differential side gears, differential clutch packs and rear axle differential clutch shims from the RH and LH cavities and tag them
"RH" and "LH".
7. Clean and inspect all parts for wear or damage; replace as necessary.
NOTE: Do not use cleaning solvents on friction plate surfaces. Wipe clean only.
8. Adjust clutch pack preload.