Mustang Cobra V8-4.6L DOHC VIN V (2000)
5. Remove the upper and lower steering column shrouds.
1
Remove the screws.
2
Remove the lower steering column shroud.
3
Remove the upper steering column shroud.
NOTE: The steering wheel has been removed for clarity.
6. Remove the instrument panel steering column opening cover reinforcement.
1
Remove the bolts.
2
Remove the instrument panel steering column opening cover reinforcement.
7. Remove the anti-theft transceiver module.
1
Remove the screw from the bottom of the transceiver module.
2
Disconnect the electrical connector and remove the module.
NOTE: Only apply pressure or leverage below the key cylinder lower rib.
NOTE: The steering wheel has been removed for clarity.
INSTALLATION