ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Paint, Striping and Decals > < Power Mirror Switch|Locations|Page 6972
Page 1
background image

Power Mirror Switch: Service and Repair

REMOVAL

1. Position the window regulator switch plate aside.

1

Pull at service notch.

2

Lift to release the clip at the rear edge.

CAUTION:  Use a shop towel or similar material between the tool and the front door trim panel or damage to the front door trim panel may
occur.

2. Remove the power exterior rear view mirror control switch.

^

Disconnect the electrical connector.

INSTALLATION

1. To install, reverse the removal procedure.

Paint, Striping and Decals > < Power Mirror Switch|Locations|Page 6972