Mustang Cobra V8-4.6L DOHC VIN V (2000)
6. Remove the LH nut and bypass tube.
Installation
1. Note: Do not cut the O-ring seal during tube installation into cylinder heads or engine coolant leakage may occur.
Note: Clean O-ring sealing surface on the cylinder heads and lubricate the O-ring seal. Use Premium Engine Coolant E2FZ-195 49-AA or B, in
Oregon F5FZ-19549-CC, in Canada CXC-10 meeting Ford specification ESE-M97B44-A.
To install, reverse the removal procedure
2. Fill the cooling system.
