Mustang Cobra V8-4.6L DOHC VIN V (2000)
Intake Manifold: Service and Repair
Lower Intake Manifold
Removal
1. Remove the upper intake manifold.
2. Disconnect the fuel line.
3. Remove the coolant by-pass tube.
4. Remove the generator.
5. Disconnect the electrical connector and the vacuum line from the fuel pressure sensor.
6. Disconnect the eight fuel injectors.
7. Separate the fuel charging wiring from the fuel injection supply manifold studs in three places.
8. Remove the eight bolts and two studs in the sequence shown.