Mustang Cobra V8-4.6L DOHC VIN V (2000)
Evaporator Core: Service and Repair
REMOVAL
NOTE:
-
The evaporator core is not separately serviceable, it is serviced only with the evaporator core housing assembly.
-
Installation of a new suction accumulator is not required when repairing the air conditioning system except when there is physical evidence of
contamination from a filed A/C compressor or damage to the suction accumulator.
-
If an evaporator core leak is suspected, the evaporator core must be leak tested before it is removed from the vehicle.
1. Remove the evaporator core housing. Refer to: Heating and Air Conditioning, Evaporator Case, Service and Repair, Removal and
Installation, See: Evaporator Case/Service and Repair/Removal and Installation
2. Transfer the components from the old evaporator core housing to the new evaporator core housing.
INSTALLATION
1. Install the evaporator core housing. Refer to: Heating and Air Conditioning, Evaporator Case, Service and Repair, Removal and
Installation, See: Evaporator Case/Service and Repair/Removal and Installation