ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Air Bag Disarming and Arming|Page 7353 > < Air Bag Disarming and Arming|Page 7351
Page 5
background image

14. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger air bag module electrical connector.
15. Install the RCM fuse F36 (15A) to the CJB.
16. Connect the battery ground cable.

Reactivation Procedure

1. Remove the RCM fuse F36 (15A) from the CJB.
2. Disconnect the battery ground cable and wait at least one minute.

3. Remove the restraint system diagnostic tool from the vehicle harness side of the passenger air bag module electrical connector.

4. Connect the passenger air bag module electrical connector.
5. Install the right hand A/C register duct.

Air Bag Disarming and Arming|Page 7353 > < Air Bag Disarming and Arming|Page 7351