Mustang Cobra V8-4.6L DOHC VIN V (2000)
Mass Air Flow Sensor: Service and Repair
REMOVAL
CAUTION: The Mass Air Flow (MAF) sensor hot wire sensing element and housing are calibrated as a unit and must be repaired as a complete
assembly. Do not damage the sensing element (internal to housing) or possible failure to the mass air flow sensor may occur.
1. Disconnect the battery ground cable. For additional information, refer to Battery.
2. Remove the air cleaner outlet tube. For additional information, refer to Fuel Delivery and Air Induction.
3. Remove the Mass Air Flow sensor (MAF):
^
Disconnect the connector.
^
Remove the four nuts and the MAF sensor.
INSTALLATION
1. To install, reverse the removal procedure.