Mustang Cobra V8-4.6L DOHC VIN V (2000)
2. Cut and strip the wires near the passenger air bag electrical connector.
3. Obtain two wires (20 gauge minimum) at least 6.1 meters (20 feet) long and attach one end of each wire to the stripped ends of the passenger air
bag module wires.
4. Place the air bag module on a flat surface in an open outdoor area with the deflector can facing downward.
5. Remain at least 6.1 meters (20 feet) away from the air bag module.
6. Deploy the air bag module by touching the other ends of the two wires to the terminals of a 12-volt battery.
7. To allow for cooling, wait at least ten minutes before approaching the deployed air bag.
8. Dispose of the deployed air bag module in the same manner as any other part to be scrapped.
