Mustang Cobra V8-4.6L DOHC VIN V (2000)
2. Remove the steering column opening lower reinforcement.
9. Remove the lower steering column shroud .
1. Remove the tilt wheel handle and shank.
2. Remove the four screws.
3. Remove the lower steering column shroud.
10. Remove the ignition switch lock cylinder.
1. Position the ignition switch lock cylinder to the RUN position.
2. Using the suitable tool, push upward on the cylinder release tab while pulling the ignition switch lock cylinder outward.
11. Raise the upper steering column shroud.
12. Remove the Passive Anti-Theft System (PATS) transmitter.
1. Remove the PATS transmitter retaining screw.
2. Position the PATS transmitter out of the way.
