Mustang Cobra V8-4.6L DOHC VIN V (2000)
1. Install the steering column lock gear and bearing.
^
Use Ignition Lock Grease FOAZ-19584-A or equivalent meeting Ford specification ESA-M1C232-A to coat the steering column lock gear and
the steering column lock housing bearing.
^
The narrow section of the keyhole must be in the one o'clock position, with the tab inboard at the three o'clock position and rotate it
counterclockwise
2. Install the bearing retainer firmly to engage the four retention tabs into the lock housing
3. Install the steering wheel.
4. Install the ignition switch lock cylinder.
^
Verify ignition switch lock cylinder operation.
