ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Steering Gear|Service and Repair > < Mechanical Specifications|Page 5602
Page 1
background image

Steering Gear: Testing and Inspection

Steering Gear Grunt/Shudder Test

1. Start and run the vehicle to operating temperature.
2. Set engine idle speed to 1200 rpm.
3. Rotate the steering wheel to the RH stop, then turn the steering wheel 90° back from that position. Turn the steering wheel slowly in a 15° to 30°

arc.

CAUTION:  Do not hold the steering wheel against the stops for more than three to live seconds at a time. Damage to the power steering pump
will occur.

4. Turn the steering wheel another 90°. Turn the steering wheel slowly in a 15° to 30° arc.
5. Repeat the test with power steering fluid at different temperatures.
6. If a light grunt is heard or a low (50 - 200 Hz) shudder is present, this is a normal steering system condition.
7. If a loud grunt is heard, or a strong shudder is felt, fill and purge the power steering system.

Steering Gear|Service and Repair > < Mechanical Specifications|Page 5602