Mustang Cobra V8-4.6L DOHC VIN V (2000)
Stabilizer Bushing: Service and Repair
Front
Removal
CAUTION: Suspension fasteners are critical parts because they affect performance of vital components and systems and their failure can result in
major service expense. A new part with the same part number or an equivalent part must be installed, if installation is necessary. Do not use a part of
lesser quality or substitute design. Torque values must be used as specified during reassembly to ensure correct retention of these parts.
1. Raise the vehicle on a hoist.
2. Remove the wheel and tire assemblies.
3. Disconnect the front stabilizer bar links (5K483) from the front stabilizer bar (5482).
1. Remove the nuts and bushings. Discard the nuts.
2. Rotate the stabilizer bar to disconnect the links.
4. Remove and discard the nuts.
5. Remove the stabilizer bar bracket (5486) and the stabilizer bar mounting bracket adapter (5B482).
