Mustang Cobra V8-4.6L DOHC VIN V (2000)
Using the special tool, compress the spring until it is loose in the spring insulator (5415).
11. Remove the front suspension lower arm pivot nuts and bolts.
12. Lower the front suspension lower arm and remove the jack stand.
13. Remove the spring.
1. Swing the front suspension lower arm out of the fender well.
2. Remove the spring and the spring insulator.
Installation
1. Install the spring.
1. Position the spring and spring insulator in the front suspension lower control arm.
2. Swing the arm into the fender well.