Mustang Cobra V8-4.6L DOHC VIN V (2000)
Universal Joint: Service and Repair
Special Tools
Disassembly
1. Remove the driveshaft.
2. CAUTION: Under no circumstances is the driveshaft assembly to be clamped in the jaws of a vise or similar holding fixture. Denting or
localizing fracture can result, causing driveshaft failure during vehicle operation.
Place the driveshaft on a suitable workbench, being careful not to damage the tube.
3. Note: If components are not marked and installed correctly, driveline imbalance can occur.
Index-mark the positions of the driveshaft components.
4. Clamp the U-joint tool in a vise.
