Mustang Cobra V8-4.6L DOHC VIN V (2000)
Windshield: Vehicle Damage Warnings
CAUTION:
^
Cover the instrument panel to prevent possible damage.
^
Care must be taken to prevent scratching the pinch weld.
^
After installing the urethane installed windshield, the vehicle should not be driven until the urethane sealant has cured. The curing time at
temperatures above 13°C (55°F) and relative humidity above 50% is 12 - 24 hours (decreasing at higher temperatures and lower humidities).
Inadequate curing of the urethane sealant may adversely affect the strength of the urethane sealant bond.
^
Wipe off the urethane glass prep immediately after each application because it flash dries. Apply deliberate strokes, making sure not to overlap the
applied area.
^
If the vehicle is to be driven within 24 hours of urethane sealant application, Urethane Sealant Essex U-216 meeting Ford specification
WSB-M2G316-B must be used due to its one hour cure time.
^
Open a window to prevent the windshield glass from being pushed out by air pressure when a door is closed.
