Mustang GT V8-4.6L SOHC VIN X (1998)
Antenna: Service and Repair
Base And Cable, Fixed Antenna
REMOVAL
1. Remove radio chassis.
2. Remove the RH cowl side trim panel.
3. Remove antenna pushpins retaining antenna lead to A/C evaporator housing and A/C recirculating air duct. Disconnect antenna from rear of radio
chassis.
4. Remove the radio antenna base cap and antenna base and cable retaining screws. Pull the cable through the holes in the door hinge pillar and front
fender. Remove the radio antenna base and cable as an assembly.
INSTALLATION