Mustang GT V8-4.6L SOHC VIN X (1998)
REMOVAL
1. Disconnect battery ground cable.
2. Remove the steering column opening cover assembly and reinforcement to access Passive Anti-Theft System (PATS) module located to right of
fuse junction panel.
3. Remove three fasteners retaining module and bracket and one fastener attaching metal brace near module.
4. Disconnect main wiring harness connector and remove PATS module and mounting bracket.
INSTALLATION
NOTE: The PATS module must be reconfigured after replacement. Review information found in the PATS Configuration Command Index. For
additional reprogramming assistance, review the help screen on the New Generation STAR (NGS) Tester configuration card.
1. Follow removal procedure in reverse order.
2. Tighten all three screws to 2.4-4.0 N.m (22-35 lb-in).
