Mustang GT V8-4.6L SOHC VIN X (1998)
REMOVAL
1. Remove rear seat back assembly.
2. Remove package tray trim panel.
3. Disconnect wiring connectors.
4. Remove six subwoofer enclosure retaining nuts and remove subwoofer enclosure assembly.
INSTALLATION
1. Follow removal procedure in reverse order.
2. Tighten retaining nuts to 8-10 N.m (71-88 lb-in).
Front Door
REMOVAL
1. Remove RH front door trim panel.
2. For lower radio speaker, remove the four retaining screws.
3. Disconnect electrical connectors and remove radio speaker.
4. To remove upper radio speaker, if equipped, remove access cover.
5. Remove two radio speaker housing retaining screws.
6. Disconnect electrical connector and remove radio speaker.