Mustang GT V8-4.6L SOHC VIN X (1998)
Brake Caliper: Description and Operation
Brake Caliper
Front
The front disc brake caliper assembly consists of the following:
-
pin slider-type housing
-
inner and outer brake lining assemblies
-
a single caliper piston
-
disc brake pad anti-rattle clip
-
front disc brake caliper anchor plate
-
wheel cylinder bleeder screw
-
two disc brake caliper locating pins which serve as retaining bolts
-
rectangular section rubber piston seal
-
molded rubber dust boot
Rear
The rear disc brake caliper consists of:
-
a pin-slider type housing.
-
single rear disc brake piston and adjuster.
-
rear disc support bracket.
-
two lubricated disc brake caliper locating pins positioning the rear disc brake caliper relative to the rear disc support bracket.
-
rubber slide pin boot seals that prevent lubricant washout and pin corrosion.
