Mustang GT V8-4.6L SOHC VIN X (1998)
6. Using new washers, connect rear wheel brake hose to rear disc brake caliper. Tighten retaining bolt to 40-60 Nm (30-44 ft. lbs.).
7. Bleed serviced component.
8. Install wheel and tire assembly, using Rotunda Accutorq Lug Nut Sockets 164-RO303 or equivalent on 1/2 inch drive air impact wrench or torque
wrench to tighten lug nuts to 115-142 Nm (85-104 ft. lbs.).
CAUTION: Failure to tighten lug nuts in a star pattern may result in high rotor runout, which will speed up the development of brake roughness,
shudder and vibration.
9. Lower vehicle.
