Mustang GT V8-4.6L SOHC VIN X (1998)
Cruise Control Servo: Service and Repair
REMOVAL
1. Disconnect speed control actuator from throttle body.
2. Raise vehicle on hoist.
3. Remove LH front wheel and tire assembly.
4. Remove front fender splash shield.
5. Disconnect speed control servo electrical connector.
6. Remove two retaining screws from speed control servo bracket to fender rail.
7. Remove three screws retaining speed control servo to speed control servo bracket.
8. Remove speed control cable cap from speed control servo by pressing cap locking arm and rotating speed control cable cap counterclockwise.
