Mustang GT V8-4.6L SOHC VIN X (1998)
NOTE: This will position crankshaft at top dead center (TDC).
13. Install timing chains.
CAUTION: Timing chain procedures must be followed exactly or damage to valves or Pistons will result.
14. Inspect and replace crankshaft front seal and engine front cover as necessary.
15. Apply a 8-12 mm (0.32-0.47 inch) bead of Silicone Gasket and Sealant F6AZ-19562-AA or equivalent meeting Ford specification
WSE-M4G323-A6 in locations shown.
NOTE: Prior to applying sealer, clean sealing surfaces with Metal Surface Cleaner F4AZ-19A536-RA or equivalent meeting Ford specification
WSE-M5B392-A, to remove all residues that may interfere with the sealer's ability to adhere.
