Mustang GT V8-4.6L SOHC VIN X (1998)
25. Remove each main bearing cap and lower crankshaft main bearing and crankshaft thrust main bearing. Keep each cap, lower crankshaft main
bearings and crankshaft thrust main bearing together.
NOTE: The location of the main bearing caps and the crankshaft main bearings should be identified. When the engine is assembled crankshaft
main bearings which are to be reused should be installed in their original positions.
26. Remove crankshaft.
CAUTION: When removing the crankshaft, use care not to damage any of the bearing surfaces on the crankshaft.
27. If required, replace crankshaft main bearings, crankshaft thrust main bearing and crankshaft thrust washer.