Mustang GT V8-4.6L SOHC VIN X (1998)
29. Install RH and LH valve cover gaskets. Tighten studs and bolts to 8-12 Nm (71-106 in. lbs.).
30. Install new oil bypass filter.
31. Install drive belt idler pulley and drive belt tensioner with ignition coils and tighten seven nuts to 20-30 Nm (15-22 ft. lbs.).
32. Install water pump pulley and tighten bolts to 20-30 Nm (15-22 ft. lbs.).
33. Install accessory drive belt.
34. Install flywheel and tighten six bolts to 73-87 Nm (54-64 ft. lbs.).
35. Install ignition wires.
36. Install engine.