ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Piston, Engine|Testing and Inspection > < Harmonic Balancer - Crankshaft Pulley|Specifications|Page 1777
Page 1
background image

Piston: Specifications

Diameter [1] 

Red 1 ...........................................................................................................................................................  90.192-90.207 mm (3.5509-3.5515 inch)
Blue 2 ..........................................................................................................................................................  90.205-90.220 mm (3.5514-3.5520 inch)
Yellow 3 ......................................................................................................................................................  90.218-90.223 mm (3.5518-3.5525 inch)

Piston-to-Bore 

Clearance Limit ...........................................................................................................................................  0.012-0.026 mm (0.00047-0.00102 inch)

Piston Pin Bore ......................................................................................................................................  22.0015-22.004 mm (0.866199-0.866297 inch)
Ring Groove Width: 

Compression, Top .......................................................................................................................................  1.530-1.550 mm (0.06024-0.06102 inch)
Compression, Bottom ..................................................................................................................................  1.520-1.530 mm (0.05984-0.06024 inch)
Oil ...............................................................................................................................................................  6.996-7.224 mm (0.27543-0.28441 inch)

[1] Measured below the oil ring groove.

Piston, Engine|Testing and Inspection > < Harmonic Balancer - Crankshaft Pulley|Specifications|Page 1777