Mustang GT V8-4.6L SOHC VIN X (1998)
Engine Oil Dip Stick - Dip Stick Tube: Service and Repair
REMOVAL
1. Remove LH front engine support insulator.
2. Remove bolt retaining oil level indicator tube to cylinder head and remove oil level indicator tube.
INSTALLATION
1. Inspect O-ring and replace as needed.
2. Lubricate O-ring with clean engine oil meeting Ford specification WSS-M2C153-G and route oil level indicator tube through exhaust manifold
and into cylinder block.
3. Fully seat tube into cylinder block and install retaining bolt. Tighten to 8-12 Nm (71-106 in. lbs.).
4. Install LH front engine support insulator.
5. Start engine and check for leaks.