Mustang GT V8-4.6L SOHC VIN X (1998)
Intake Manifold: Testing and Inspection
CLEANING
CAUTION: Remove all filings and foreign matter that may have entered the intake manifold as a result of service or possible damage to the engine
may occur.
Remove all gasket material from the machined surfaces of the intake manifold. Clean the intake manifold in a suitable solvent and dry it with
compressed air.
INSPECTION
CAUTION: Check the baffle plates on the underside of the lower intake manifold if so equipped. The baffles should be securely fastened or possible
damage to the engine may occur.
Inspect the intake manifold for cracks, damaged gasket surfaces or other conditions that would make it unfit for further service. Replace all studs that
are stripped or otherwise damaged. Clean the Exhaust Gas Recirculation (EGR) passages.