Mustang GT V8-4.6L SOHC VIN X (1998)
Fig. 26 Crankshaft Sprocket Position
6. If removed, install LH crankshaft sprocket.
NOTE:
-
crankshaft sprockets are identical. They may only be installed one way. Refer to the illustration for proper crankshaft sprocket installation.
-
Make sure tapered part of crankshaft sprocket faces away from cylinder block.
Timing Chain Marks
7. Install LH timing chain on camshaft sprocket. Make sure copper link of timing chain lines up with timing mark of camshaft sprocket.
NOTE: If copper links of timing chain are not visible, split both timing chains in half and mark the two opposing links as shown.
8. Install LH timing chain on crankshaft sprocket. Make sure copper link of timing chain lines up with timing mark of crankshaft sprocket.
9. If removed, install RH crankshaft sprocket.
NOTE: Make sure tapered part of crankshaft sprocket faces toward cylinder block.
10. Install RH timing chain on camshaft sprocket. Make sure copper link of timing chain lines up with timing mark of camshaft sprocket.
