Mustang GT V8-4.6L SOHC VIN X (1998)
3. Apply an 8-12 mm (0.32-0.47 inch) bead of Silicone Gasket and Sealant F6AZ-19562-AA or equivalent meeting Ford specification.
NOTE:
-
Prior to applying sealer, clean sealing surfaces with Metal Surface Cleaner F4AZ-19A536-RA or equivalent meeting Ford specification
WSE-M5B392-A to remove all residues that may interfere with the sealer's ability to adhere.
-
Install engine front cover and retainers in no more than four minutes after applying sealer.
4. Install engine front cover on engine no more than four minutes after applying sealant.
