Mustang GT V8-4.6L SOHC VIN X (1998)
Heater Hose: Service and Repair
REMOVAL
1. Partially drain cooling system.
2. Remove eight retaining bolts and strut tower brace.
3. Disconnect and remove heater water hoses.
INSTALLATION
1. Apply Premium Engine Coolant E2FZ-19549-AA or equivalent meeting Ford specification ESE-M97B44-A to the inside of the heater water
hoses.
2. Install new heater water hoses and clamps.
3. Fill cooling system.
4. Install strut tower brace with eight retaining bolts. Tighten bolts to 20-30 N.m (15-22 Lb-Ft).